CONNECT TO INTERNET ON SYMBIAN MOBILE USING PC's INTERNET CONNECTION.
THINGS YOU NEED
1)A PC with internet connection. OS does not matter. Also it doesn’t matter how you connect to internet from PC. A symbian handset with
2)GnuBox – a free and open-source tool which will do thing on your handset. mRouter to do things on PC side. Its optional but can save your lots of time. You can manually handle
3)mRouter to do things on PC side. Its optional but can save your lots of time. You can manually handle
Where you will find these things:-
1)Download GNU box for Nokia N 70,72 and other SYMBIAN S60 2nd edition phones using GTA KM link provided belowDOWNLOAD
(APPROVED BY AVG FREE 2011 edition)
(USE THIS LINK IF THE PREVIOUS ONE DOSENT WORK ON YOUR PHONE).(APPROVED BY AVG FREE 2011 edition)
Note:- For users having other handsets download GNU box by searching in google.
2) mRouter can be downloaded by searching it in google.
Steps for using internet:-
Let’s first configure m-Router to accept incoming. Start the mRouter installation and complete it. If you are using Widcomm drivers, something like this might show up right after the installation process:
1)After the installation, the setup wizard will come, click Next>
2)Select your N70 in the device selection screen and click Next>
3)Uncheck the box where it says "Automatically connect to this device when it is in range” and click Finish
4)Now right click on the m-Router taskbar icon and click on Advanced Settings
5)Click on the View button under Additional COM Ports
6)Select the COM Port used by your Bluetooth device and click on >> as shown above. In my case the COM Port used is COM5, it may be different in your case.
7)After setting the COM Port, click OK.
8)Under connectivity methods, look for Additional COM Ports and expand it to make sure your COM port is there. Click Close
Now that our m-Router is all set, let’s configure Gnubox on the N70.
Steps for configuring GNU BOX:-
1)Transfer the file gnubox_N70.sis and follow the regular installation process. Make sure that Bluetooth is turned ON on your PC and N70. Also make sure that your PC and N70 are paired.
Go to Tools -> Settings -> Connection -> Access points .
2)Go to Options -> New access point -> Use default settings.
3)Change the connection name to Bt. Gnubox will not accept any other connection name so make sure you have it set to Bt.
4)Now that you have a connection named Bt, run Gnubox and go to Options -> Install -> Create Records
5)Dont worry when it says ISP ‘Bt’ not found. Exit Gnubox. This step is very important so make sure you Exit Gnubox.
6)Now run Gnubox again. This time the screen will look something like below.
7)Go to Options -> 2box Bluetooth -> Serial port.
8)The phone will now search for Bluetooth devices, select you PC and hit OK. The screen should look like below.
9)We are almost done here. Now Go to Options -> Install -> change default AP to set Bt as your default Access Point. Then go to Options -> Debug -> Bring up IF
That’s all, the phone will connect to your PC via Bluetooth and show a message saying "Connection Open” (couldn’t take a screenshot of that, it goes away too quick). Now you can browse the internet, chat with friends and do pretty much anything that you can do over GPRS.
NOTE:- THIS FILE WAS TAKEN FROM ALL ABOUT SYMBIAN.com